Responding to Messages
35
Phenomenon
Cause
Corrective Action
Cannot update firmware.
You have uploaded firmware for
a different model.
Check the firmware version.
(→CD "Updating the Firmware")
Replace part soon.
It is almost time to replace
consumables for which service
is required.
You can continue to use the printer
for some time until
Past part
replacement.
is displayed.
Contact your
Océ
dealer for
assistance.
Past part replacement.
It is past the recommended
time to replace consumables for
which service is required.
Contact your
Océ
dealer for
assistance.
Printhead error
An incompatible
Printhead
has
been installed.
Install a
Printhead
specified for use
with the printer.
(→CD "Replacing the Printhead")
There is a problem with the
Printhead
.
Open the
Top Cover
. If the
Carriage
is visible, replace the
Printhead
with
a new one.
(→CD "Replacing the Printhead")
If, after opening the
Top Cover
, you
see that the
Carriage
is not visible,
follow the steps below.
Close the
Top Cover
and press
the
Online
button.
Replace the
Printhead
.
2.
1.
(→CD "Replacing the Printhead")
P Head lock cover is open.
The
Printhead Fixer Cover
is
open.
Close the
Printhead Fixer Cover
.
(→CD "Replacing the Printhead")
PHead needs cleaning.
The
Printhead
must be
cleaned.
Specify
Printhead
cleaning options.
(→P.
26
)
Cannot adjust printhead.
The
Printhead
nozzles are
clogged.
Follow the steps below to check the
nozzles.
Print a test pattern to check the
nozzles.
1.
Clean the
Printhead
if the nozzles
are clogged.
2.
(→P.
25
)
(→P.
26
)
The
Printhead
and feed
amount cannot be adjusted
when highly transparent film is
loaded.
We recommend loading a type of
paper that you often use, other than
film, before adjusting the
Printhead
.
(→P.
27
)
Adjust the feed amount manually.
(→CD "Adjusting the Feed Amount
Manually")
