Responding to Messages
3
0
Cannot adjust with present
paper.
The
Printhead
and feed
amount cannot be adjusted
when highly transparent film is
loaded.
We recommend loading a type of
paper that you often use, other than
film, before adjusting the
Printhead
.
This paper cannot be used.
The loaded paper is too large
for the printer.
Load paper of the correct size.
Hold down the
Stop
button for a
second or more to cancel printing.
1.
Change the paper type in the
printer driver and try printing again.
2.
(→P.
27
)
Adjust the feed amount manually.
(→CD "Adjusting the Feed Amount
Manually")
Paper that is too small for the
printer has been loaded.
Load paper of the correct size.
(→CD "Paper Sizes")
(→CD "Paper Sizes")
Borderless print is not
possible with roll loaded.
The printer has received a print
job that cannot be printed using
borderless printing.
Follow the steps below to change
the settings of the print job to enable
borderless printing.
Hold down the
Stop
button for a
second or more to cancel printing.
1.
In the printer driver, change the
settings to a paper size compatible
with borderless printing, and then
try printing again.
2.
(→CD "Borderless Printing of
Photos and Images")
Press the
Online
button to resume
printing.
However, this may cause a paper
jam or printing problem.
Check paper size setting in
driver.
The paper size as specified
on the printer does not match
the size specified in the printer
driver.
Load paper of the same size as you
have specified in the printer driver.
(→P.8)
(→P.12)
Follow the steps below to ensure
the paper size matches on the
printer and in the printer driver.
Press the
Online
button to resume
printing.
However, this may cause a paper
jam or printing problem.
Error Messages
Cause
Corrective Action
