Troubleshooting if You Cannot Print
39
Phenomenon
Status
Corrective Action
The printer ejects blank,
unprinted paper.
The leading edge of the roll
paper was cut to straighten it.
This operation is normal.
There is little ink left.
Check the ink level and replace the
Ink
Tank
that is low.
When
Forced
is selected under
Trim
Edge First
in the printer menu, the
leading edge of a roll is cut after you
load the roll to ensure the edge is
straight and eliminate any scraps of
paper. The printer is ready to print after
this initial preparation.
When
No Cutting
is selected under
Trim Edge First
, the edge is not cut
and scraps are not removed.
The
Printhead
nozzles are
clogged.
Print a test pattern to check the nozzles
and make sure the
Printhead
is in
good condition for printing.
(→P.
25
)
Clean the
Printhead
if the nozzles are
clogged.
(→P.
26
)
(→P.
16
)
The printer is damaged.
Contact your
Océ
dealer for
assistance.
