Oce COLOR SYSTEM 110, Руководство оператора

Страница: 20 / 392

1
Before Using the Copier
1-9
Before using
the Copier
About the Editor
Editor-F1
With the optional Editor-F1 (hereinafter called Editor), it is easy to make area
designations, shift position designations, and color selections using the color
palette.
mark
When placing an original on the Editor,
place the original face up and align the
upper right corner of the original with
this mark.
Edit pen
Mode setting
screen
Sheet with
drawal opening
Color palette
You can change four
types of color sheets
to select a color.
Notes on Using the Editor
Do not use the Editor near strong magnetic fields (cordless telephone, etc.).
Do not pull hard on the edit pen cord.
Do not use the edit pen with the tip near the cord.
Do not touch the tip of the edit pen to prevent incorrect entry.
Do not press hard on the mode setting screen.
Do not use the Editor with a conductor (such as a metal ruler, etc.) lying on the mode setting
screen.
If the edit pen is used to designate a position that has been heavily shaded with a pencil,
accurate area designation may be difficult.
For connections of the Editor and the copier main unit, consult with your service representative.
In particular, if the Editor connector is disconnected while the copier switch is ON, the copier
main unit may be damaged. Care must be taken.