Oce 9800, Руководство пользователя

Страница: 91 / 148

Maintenance 91
Loading rolls of copy material
The Océ 9800 has four rolls, each of which may be loaded with media of a
different width or type. The operating panel displays the width and type of
media on each roll.
After loading a roll, you need to inform the system which type of media was
loaded, i.e. bond paper, vellum or polyester film. The roll width is detected
automatically.
The definition of the new copy media is important when ‘Automatic roll
change’ has been turned on (see ‘Defining automatic roll change’ on page 73),
and is also important for preventing fold errors.
Note:
We recommend placing heavy rolls containing 650 feet of 20 lb.bond
paper in position two in the upper media roll compartment. The diameter of
such rolls may not exceed 184mm (approx. 7.25”).
▼
Re-loading copy material
1
Open the appropriate media roll compartment (see figure 73).
[73] Opening the appropriate media roll compartment
2
If necessary, empty the chip tray (see ‘Emptying the chip tray’ on page 94).
3
Remove the roll holder from the media roll compartment.
4
Release the locking mechanism by pressing the green button, then remove the
core from the holder (see figure 74).