Oce 9800, Руководство пользователя

Страница: 127 / 148

127
Océ 9800 controller error codes
If an error occurs, an icon will appear on the LCD-screen of the operating
panel. Additional information on warnings is displayed in the ‘Machine’
menu.
There are 3 different types of recoveries for warnings:
■
Temporary Warnings (TW)
Warnings related to a specific print file. Although they will not affect machine
functioning, output will probably not be what the operator expected (e.g. it
may be clipped, or a set may be split into two or more sets). The operator can
reset the warning message via the ‘Machine’ menu.
■
Operator Recoverable Warnings (ORW)
Most of these warnings are communication problems between host and
controller. The system administrator may have to change settings (e.g. rs232,
etc.). After changing settings as necessary, the system administrator can reset
the controller-error by pushing the reset-error soft key in the ‘Machine’ menu,
which will clear all active controller errors. Activating this function will
re-activate all host<->controller communications which were de-activated
when the communication error was detected.
■
Machine Recoverable Warnings (MRW)
To recover from these warnings, the operator must first try to reset the entire
controller by pressing the reset-controller soft key in the ‘Machine’ menu.
Note:
Depending on the type of connection, it may be necessary to restart
printing from the host system.
If the machine does not recover, the operator must turn the machine off and
then on again.