Key operator
67
Image correction
To correct possible horizontal or vertical image deviations, use the ‘horizontal’
and/or ‘vertical’ ‘Calibration’ function. Vertical and horizontal correction can
be adjusted independently within a range of +/- 3%, in increments of 0.1%. In
practice, this means that you can specify a calibration factor between 0.970 and
1.030.
▼
Calibrating the printer
1
Open the ‘Zoom’ card in the “Machine’ section.
2
Press the ‘Calibration’ function button twice (see figure 58).
Note:
Only ‘Vertical’ is used. ‘Horizontal’ is not used, and should be
ignored.
[58] Calibration
3
Enter the required value for vertical calibration using the numeric or the
higher/lower buttons.
4
When finished, exit key operator mode.
.....................................
.....................................
.....................................
.....................................
................
Copy
................
Program
Ready to print
................
Finishing
General
1.030
0.970
Horizontal
Vertical
prints:
0
Timers
Zoom
.....................................
................
Machine
Calibration
Controller
Содержание 9800
