Oce 9800, Руководство пользователя

Страница: 49 / 148

Default printer settings 49
High Capacity Stacker (optional)
Note:
The following default print settings are usually overruled by settings that
are sent to the printer along with the print job.
If a High Capacity Stacker is installed, copies can be ejected at the rear of the
printer into one of the six stacker bins. Each bin can stack up to 200 unfolded
copies. Copies longer than 122 cm (48”) are collected under the stacker unit.
Copies on polyester film are always delivered into the lower bin (bin 6). The
upper bin (bin 1) cannot be moved. Bins 2 through 6 can be pulled out (opened)
30 cm (approx. 12”) to facilitate emptying.
Note:
If ‘Lower output’ or ‘Folding’ are selected, copies are not delivered to
the High Capacity Stacker (see ‘Lower Container unit (optional)’ on page 52
and ‘Folder (optional)’ on page 53).
‘Bin in use’ indicator
If the indicator light next to a bin remains on
continuously, the bin is in use for copy delivery and the bin should not be
opened.
‘Bin full’ indicator
If the indicator light next to a bin flashes slowly (1Hz), the
bin is full. After emptying the bin completely, the light will stop flashing.
‘Close bin’ indicator
If the indicator light is flashing rapidly (2Hz) and the
alarm is buzzing, the bin should be closed immediately. If the bin is not closed
in time, an error will occur and the machine will stop.
The following stacker options can be selected:
Offset stack
Before the first copy of a new set or job is delivered, the delivery
bin will shift stacking position to provide easy job/set separation (see
figure 43).
[43] Using ‘Offset stack’
Offset stack selected
Offset stack not selected