Oce 9800, Руководство пользователя

Страница: 65 / 148

Key operator 65
To select the current time:
5
Press the ‘Time and Date’ function button.
6
You can now adjust the hour displayed. Press the ‘Time and Date’ function
button again to adjust the minutes displayed.
7
When finished, exit key operator mode.
Setting the reset time
If the printer remains inactive for a given period of time (no buttons pressed),
or if the ‘Correction’ button is pressed, and reset time is enabled, the default
printer settings will return to their default values. This period of time is called
the reset time.
The factory default for reset time is 2 minutes, but this value can be changed
to any time between 1 and 99 minutes, or it can be de-activated entirely.
▼
Setting the reset time
1
Access key operator mode.
2
Open the ‘Timers’ card in the ‘Machine’ section.
3
Enable ‘Reset time’ by pressing the function button (see figure 56).
[56] Reset time
4
Use the numeric or higher/lower buttons to set the required reset time.
Or,
5
Press the function button to de-activate the function, thus forcing users to
manually reset the system.
6
When ready, exit key operator mode.
..................................... ..................................... ..................................... .....................................
......................................................................................................................................
................
Copy
................
Program
Ready to print
................
Finishing
General
Time and
Prints:
0
Zoom
Timers
Date
Off after
4 hrs.
On
From:
Up to:
Friday
Monday
2 min
Time:
Date:
.....................................
................
Machine
.....
On/Off-timer Work days
Reset
time
..... .....
01 01. 95.
.....
.....
08 00.
.....
.....
12 00.
Controller