Oce 9800, Руководство пользователя

Страница: 78 / 148

78 Océ 9800 Printer User Manual
Defining connectivity settings
The Océ 9800 supports several types of interfaces. During installation, your
Océ service engineer will define the interface settings. If communications
parameters on your host system change over time, you can use system
administrator mode to define new connectivity settings.
You can change serial, Centronics, and SCSI communications parameters.
Serial
▼
Defining a serial connection
1
Open the ‘Connection’ card in the ‘Connect’ section (see figure 65)
[65] Connection card
2
Press the ‘Select connection’ button and select Serial.
3
Define the parameters.
4
When finished, exit system administrator mode.
Centronics
▼
Defining a centronics connection
1
Open the ‘Connection’ card in the ‘Connect’ section.
2
Press the ‘Select connection’ button and select ‘Centronics’.
3
Specify normal or high speed.
4
When finished, exit system administrator mode.
Ready to print
.................................. .................................. .................................. .................................. .....................................
......................................................................................................................................
Connection
................
Machine
................
Language
................
Program
Prints:
0
................
Connect
selection
Protocol Delay
Select
Connection Transm.
1 Transm.
2
Serial
Handshake:
DCE
CTS/RTS
Turnaround Baudrate: Bits
1.0 sec 1 stop bit None
8-bits 9600 1.0 sec
Interchar: Port: Stop bits: Parity: