OBO Bettermann EI30, Инструкция по монтажу

Страница: 8 / 64

8 | EN OBO Bettermann
Product description, PYROLINE® Con PLC fire protection duct
4 Product description, PYROLINE
®
Con PLC fire
protection duct
4 1 Product features
The PYROLINE
®
Con PLC is installed on interior walls and ceilings, to
route cables within. The fire-resistant material of the PYROLINE
®
Con
PLC fire protection duct fulfils the existing fire protection requirements
and, if there is a fire, prevents toxic smoke gases from spreading in
rooms and escape routes.
The PYROLINE
®
Con PLC fire protection duct stands out through the
following properties:
– PYROLINE
®
Con D PLC version for direct wall or ceiling mounting
– PYROLINE
®
Con S PLC version, for wall and ceiling mounting with a
support system of wall brackets or suspended supports and brackets
or threaded rods and support rails
– Fire load encapsulation up to 90 minutes (EI30–EI90 classification)
– Material made of non-combustible fibre glass lightweight concrete,
water and frost-resistant, non-electrically conductive
– Hard, smooth and anti-friction compacted surface
– PYROLINE
®
Con D PLC version, primed at the factory, surface refine-
ment possible through plastering, wallpapering, painting
– Processing with standard tools such as hand saw or coping saw
– Fittings for corner connection, T and cross connection for the
PYROLINE
®
Con S PLC version
– Simple creation of standard and special fittings according to individual
requirements with the PYROLINE
®
Con D PLC version
– Mounting on OBO support systems
– Simple inspection and retrofitting
– Routing of standard cable types up to a maximum diameter of
d = 21 mm, including fibre-optic cables. This excludes hollow core ca-
bles and wire cables.