OBO Bettermann EI30, Инструкция по монтажу

Страница: 60 / 64

60 | EN OBO Bettermann
Disposal
12 Disposal
National laws and regulations must be observed for disposal.
Disposal during mounting
– The residual material of the fire protection duct and the mortar can be
disposed of as mixed construction site waste.
– Dispose of the residual material of the support system, as well as
separating retainers, separating clamps and brackets, in the same
way as scrap metal.
Disposal during building demolition
– The fire protection ducts must be disposed of as a mixed construction
waste.
– The support systems, as well as separating retainers, separating
clamps and brackets, must be disposed of in the same way as scrap
metal.
Disposal after a fire
Danger of falling components!
If there is a fire, support systems and fastenings of the fire protection duct can
be massively impaired in their function and can fall. Falling components can
cause serious injuries. During disposal, proceed with extreme caution and
before dismantling, check components for instability. Wear safety shoes and a
helmet.
Irritant effect!
If there is a fire, burning cable insulation can create corrosive gases, which have
an irritant and corrosive effect. When disposing of fire protection ducts which
have been subjected to a fire, wear breathing protection and protective clothing.
If the PYROLINE
®
Con fire protection duct was subjected to fire damage,
then the complete fire protection duct must be replaced. If the fire dam-
age occurred in a duct, then check whether a replacement of the support
system is necessary. In all other cases, the support system must be
replaced.
We recommend obtaining the advice of the local fire damage restorer
during disposal.
WARNING
CAUTION