Oberheim MC 3000, Руководство по эксплуатации

Страница: 72 / 76

MC 3000
Operating Manual
142
Function key F5 (SYS T) can be pressed to enable reset for all the system variables, such
as the settings of the MIDI COMMON, reception Program change MAP, Power on
procedure, etc.
Press ESC to exit from the RESETTING PROCEDURES page without performing any
reset operations.
8.2 PANIC FUNCTION
The MC-3000 PANIC function causes the emission on all the MIDI OUT ports of a series
of messages which restore correct operation of the peripherals connected if specific "stall"
conditions occur in the MIDI communications (e.g.: notes which sound indefinitely,
permanent Pitch Bender Messages, etc.).
If this occurs, press the CURSOR and CURSOR keys simultaneously from the
TOP PAGE position in the PROGRAM mode.
The message "Sending PANIC message .." will appear on the display for a few moments
and then the original conditions will be restored.
Remember that a switch type pedal can also be assigned to this specific function as
explained in point 6.4.3 (System Pedal) of this manual.