Oberheim MC 3000, Руководство по эксплуатации

Страница: 63 / 76

MC 3000
Operating Manual
133
Once the curve is complete, the WRITE key is pressed to obtain the following video page:
After selecting the memory location which is to house the curve just created, press WRITE
again to save it.
To modify the name of the curve, press function key F6 (NAME), which works exactly as
described for saving dynamic curves, in point 6.6.2 of this section.
N.B.
In order to keep MIDI communications streamlined, when a dynamic curve is created
parallel to the X axis (the same aftertouch value for any pressure applied to the key), the
MC-300 will send only one MIDI aftertouch value.
When creating this type of curve, users are advised always to place the point of origin of
the axes at 0 in order to guarantee emission of the dynamics and aftertouch messages.