Oberheim MC 3000, Руководство по эксплуатации

Страница: 43 / 76

MC 3000
Operating Manual
113
Special operating hints:
1. For optimum MIDI BULK DUMP results, set the metronome tempo of the sequencer or
computer clock at a value of about 100 BPM.
2. The user must absolutely never attempt to modify the contents of the exclusive code file
using file editors; even an apparently tiny variation of just one letter or number will mean
that the MC 3000 is unable to recognize the file, and all the data it contains will be
irreparably lost.
3. During reception of BULK DUMP data, the MC-3000 should be set on the TOP PAGE.
4. Remember that setting of an active file on the exclusive systems disables BULK DUMP
reception.
5. In case of a Bulk Dump containing a large number of MC-3000 data, suspend the
operation every 360 Kbytes of memory transmitted to allow the data to be saved. Press
F6 again to restart the interrupted procedure.
6.3 MIDI MONITOR
ESC can be pressed to exit from any page of the Common section and obtain the
UTILITY MASTER video page, which is the main page of the UTILITY mode, which also
appears when the mode is selected using the relative key on the far right of the panel.
From this video page, the second section of the mode can be accessed by locating on the
MIDI MONITOR field with the encoder or using the cursor keys and confirming with
ENTER.
This is the only page in the section and thus also the only one automatically displayed
when the section is selected. This video page shows all the MIDI data passing through
the instrument, on the inputs or outputs. Here again, the top of the display shows
information about the operating mode and the current section, which in this case is also
the name of the page, since the MIDI MONITOR section contains only one page. The top
right-hand corner shows the MIDI MONITOR port. To change it, press function key F5,
next to the PORT rectangle. At this point, the MC 3000 offers the user the opportunity to
monitor:
•
IN 1 (data in input on MIDI IN 1 port only)
•
IN 2 (data in input on MIDI IN 2 port only)
•
ALL IN (all input data on both ports, MIDI IN 1 and MIDI IN 2)
•
OUT1 (output data on MIDI OUT 1 port only)
•
MIDI OUT2 (output data on MIDI OUT 2 port only)
•
MIDI OUT3 (output data on MIDI OUT 3 port only)
•
MIDI OUT4 (output data on MIDI OUT 4 port only)
•
MIDI OUT5 (output data on MIDI OUT 5 port only)
•
MIDI OUT6 (output data on MIDI OUT 6 port only)
•
MIDI OUT7 (output data on MIDI OUT 7 port only)
•
MIDI OUT8 (output data on MIDI OUT 8 port only)
•
ALL OUT (all data leaving from all the 8 MIDI OUT ports of the MC 3000).
•
OFF (MIDI MONITOR disactivated and so no MIDI messages displayed).