Oberheim MC 3000, Руководство по эксплуатации

Страница: 49 / 76

MC 3000
Operating Manual
119
The top of the display contains the operating mode, the page and the current section.
In the centre is a window listing the names of the MC 3000's 8 MIDI OUT PORTS.
The bottom of the screen carries the usual icon rectangles indicating the pages of the
EDIT TABLES section, with the icon of the current page (marked with the abbreviation
OUT, to indicate that the page refers to the OUT ports) illuminated in reverse.
The last icon represents not a page, but a function common to all the pages of the Tables
section. This is the EDIT function, associated to function key F6.
Once a given port has been selected using the encoder or function keys, its name can be
modified using the EDIT function; when the corresponding key F6 is pressed the display
switches to the PORT ASSIGN NAME video page, with the prompt PLEASE ENTER
PORT NAME in the centre.
The name of the port appears below this prompt with a flashing cursor dash on its first
character. This means that the first character of the port name is automatically selected
and ready for modification using the encoder or the alphanumeric keyboard, or using INC
and DEC. To select the other characters of the name, move onto them using the cursor
keys.
The bottom of the display contains icons associated to the function keys, which are:
1. INS, which stands for insert, meaning that the relative function key F1 can be pressed
to enter letters or numbers in line with the flashing cursor dash.
2. BKS, which stands for backspace, meaning that the relative function key F2 can be
pressed to remove one letter or number of the part preceding the flashing cursor dash.
3. DEL, which stands for delete, meaning that the relative function key F3 can be pressed
to remove a letter or number on the flashing cursor dash.
4. SPC, which stands for space, meaning that the relative function key F4 can be pressed
to insert an empty space on the flashing cursor dash.
5. CAPS, indicating that if the relative function key F5 is pressed, all the letters typed from
then on will be capitals until F5 is pressed again. (When this function is active, CAPS
ON will appear in the top right-hand corner, next to the name of the video page;
otherwise, CAPS OFF will appear).
The DONE icon, associated to key F6, confirms the modification made and returns you to
the previous, OUT, page, where the new name just assigned to the selected port appears
alongside it. To abort the procedure, press ESC and the OUT page will immediately
reappear with the original name against the selected port.
Edit name of the
selected MIDI
OUT port