manualshive.com logo in svg

Oberheim MC 3000, Руководство по эксплуатации

Поделиться
Скачать
Oberheim MC 3000 Скачать руководство пользователя страница 30

MC 3000

Operating Manual

100

The last rectangle is marked MORE.  The corresponding function key F6 can be pressed
to return to the previous page of the CURVES section. The possibility of assigning
different Aftertouch curves to several zones allows the user to create Aftertouch layers
and splits between different zones and MIDI channels. When programming is complete, to
save these modifications press WRITE and follow the procedure described at point 3.8.

4.6. CONTROLLERS (CTL).

4.6.1 Introduction

The user may press F5, close to which the CTL icon appears on all video pages, from any
EDIT page or section to access the CONTROLLERS section.
Here the user can define for each zone one or more  controllers (slider and pedals) that
will move the value of a specific MIDI CONTROL CHANGE (CC).

4.6.2  SLIDERS

The first page of the CONTROLLERS section, which appears automatically when the
section is selected, is dedicated to the sliders, and is thus called SLIDERS.
Here again, the top of the display contains the name of the current page, the name of the
current patch and the lights indicating the activation status of its zones.  The ZONE field
appears below this; after locating here with the cursor keys, the user can turn the encoder
or use the INC and DEC keys to select the zone where a specific type of control is to be
assigned.
The 8 sliders are shown in the centre of the display. Numerical values which identify the
type of control assigned to the slider corresponding, or OFF indicating that the slider in
question is not active in the current zone, appear below each slider in line with CC NR.

After locating on these values with the cursor keys, the user can select the type of control
to be assigned to the corresponding slider.  The name of the control selected will appear
automatically in the top of the screen, beside CC NAME, as a display message only.

Zone

Zone

Aftertouch
curve number

CC assigned
to slider

Name of the selected
Aftertouch curve

Dafault
Value

Appearance
of the curve

Содержание MC 3000













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды