Oberheim MC 3000, Руководство по эксплуатации

Страница: 13 / 76

MC 3000
Operating Manual
83
•
Use the cursor keys to move to the line where the words POWER ON TYPE appear: at
this point the current function (NORMAL mode in the illustration) is selected, and the
word NORMAL will be highlighted.
•
The INC and DEC keys or the encoder can now be used to vary the setting of the
switch-on mode from NORMAL to FAST and vice-versa.
•
Press ESC to exit (Utility Menu page). All modifications will be saved automatically.
2.3 SELECTING THE PATCH which will automatically appear at switch-on.
You can choose the patch which will automatically appear when the instrument is switched
on. To do this, access the POWER ON PROCEDURES page (just described) in the
TOOLS section 6 of the UTILITY operating mode
•
Now select the third line where the words PATCH POWER ON appear, using the cursor
keys to move around the display.
•
Set the number of the patch you wish to appear automatically when the instrument is
switched on using the encoder or the alphanumeric keypad. The rectangle in the
bottom right-hand corner where the word LAST appears refers not to a page but to a
special function. When this function is selected using the corresponding function key
(F6), the last patch selected before switch-on will automatically appear.
•
Press ESC to exit (Utility menu)
N.B. Function Key F6 (LAST) works only when the field PATCH POWER ON is selected.
Switch-on
mode selection
function
Automatic switch-
on patch selection
function
Function Key
LAST