manualshive.com logo in svg

Oberheim MC 3000, Руководство по эксплуатации

Поделиться
Скачать
Oberheim MC 3000 Скачать руководство пользователя страница 28

MC 3000

Operating Manual

98

Below the central window there is a window identified by the icon S, indicating that it is
dedicated to exclusive systems.
After locating in the SYS N field, the user can select the desired exclusive system table by
turning the encoder or pressing the INC and DEC keys.
The MC 3000 offers the user 16 preset tables in the instrument memory, P1-P16, and 48,
U17-U64, which can be programmed by the user himself in the UTILITY mode.
Each table contains exclusive system strings.  When the patch is recalled, they are taken
from the table and sent to the connected expander before all the others.

CAUTION: When the exclusive code selected has a RESET function, the unit connected
by MIDI takes a few milliseconds to reset the data; during this time, it is probable that the
other messages belonging to the zone will be ignored.

The SYS NAME field which appears alongside the SYS N field is for display only and will
contain the name corresponding to the Sys-ex table selected.

On completion of programming, to save these modifications press the WRITE key and
follow the procedure described in point 3.8.

4.5 CURVES (CRV)

4.5.1 Introduction

The user may press F4, below the CVR icon, from the previous page or any other page or
any section of the EDIT mode to access the CURVES section, where he is able to assign
the dynamic or aftertouch curve to each zone.  These curves are chosen from the 16
preset in the instrument's ROM, or the 48 curves the user has set himself in the UTILITY /
EDIT CURVES section.

4.5.2  CURVES 1.

Here again, the top of the display shows the name of the current page, the name of the
current patch and the lights indicating the zone activation status.

After locating the zone field with the cursor keys, the user can select the zone where the
dynamic response curve will be set using the encoder or INC and DEC. After using the
cursor keys to move down to the CURVE N. field, the user can select the dynamic
response curve to be applied to the chosen zone.
Alongside this field is a window showing the appearance of the curve to be selected.  This
window is for display only, and cannot be used to modify the curve.  To modify the curve,

Zone

Dynamic curve
number

Name of the selected
Dynamic curve

appearance
of the curve

Содержание MC 3000













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды