Oberheim MC 3000, Руководство по эксплуатации

Страница: 37 / 76

MC 3000
Operating Manual
107
This video page informs you of the location to which the chain is currently assigned and
allows you to modify the number of the location for the chain you have just modified, using
the encoder or the INC and DEC keys, or using the number keys, in which case ENTER
must be used to confirm the figure typed.
The central panel on the display informs the user that to save the modification he must
press WRITE again, or he may press ESC to abort the procedure. If you wish to assign a
name to the chain or change the current name before saving the modification, press F5
below the Name icon. The following video page will appear
The name of the patch (or DEFAULT if the chain does not have a name) appears in the
centre of the display.
A dash which blinks under the first character in the name indicates that that character is
selected and may be modified using the encoder, the INC keys or the alphanumeric keys.
The cursor keys can be used to locate on other characters and modify them with the same
procedure, thus making up the new patch name.
All the function keys are enabled here.
•
F1 selects the INSERT writing mode, where each character selected using the number
pad is inserted; if this mode is not selected, each character is selected is not entered
until the cursor keys are used to move on to the next space.
•
F2 provides the Backspace function, used to delete the character before the one
selected.
•
F3 deletes the selected character.
•
F4 (SPC) insert a space character.
•
If F5 (CAPS) is in ON status, the letters selected using the Numeric pad will be capitals;
in OFF they will be lower case letters.
F6 (DONE) can be pressed to return to the previous video page, where the user can
decide whether to save all the modifications (WRITE) or abort the entire operation (ESC).
Guided example of modification of a chain.
•
When the Chain mode key on the right of the keyboard front panel is pressed, the
display will show the PLAY CHAIN video page, where the chain n. field is automatically
selected to allow the user to choose the chain to be selected.
•
Select the chain to be modified by turning the encoder or pressing the INC and DEC
keys or by selecting the corresponding number using the Numeric pad and then
confirming with ENTER.