manualshive.com logo in svg

NXP Semiconductors MPC5602S, Справочное руководство

Микроконтроллер NXP Semiconductors MPC5602S предоставляет высокую производительность и надежность для различных приложений. На нашем сайте вы можете бесплатно скачать Руководство по эксплуатации, чтобы более полно понять возможности этого продукта. Посетите manualshive.com для загрузки.

Поделиться
Скачать
background image

Interrupt Controller (INTC)

MPC5606S Microcontroller Reference Manual, Rev. 7

754

Freescale Semiconductor

 

21.4.1.1

Software vector mode

In software vector mode, the interrupt exception handler software must read a register in the INTC to 
obtain the vector associated with the interrupt request to the processor. The INTC will use software vector 
mode for a given processor when its associated HVEN bit in INTC_MCR is negated. The hardware vector 
enable signal to processor 0 or processor 1 is driven as negated when its associated HVEN bit is negated. 
The vector is read from INC_IACKR. Reading the INTC_IACKR negates the interrupt request to the 
associated processor. Even if a higher priority interrupt request arrived while waiting for this interrupt 
acknowledge, the interrupt request to the processor will negate for at least one clock. The reading also 
pushes the PRI value in INTC_CPR onto the associated LIFO and updates PRI in the associated 
INTC_CPR with the new priority.

Furthermore, the interrupt vector to the processor is driven as all 0s. The interrupt acknowledge signal 
from the associated processor is ignored.

21.4.1.2

Hardware vector mode

In hardware vector mode, the hardware signals the interrupt vector from the INTC in conjunction with a 
processor that can use that vector. This hardware causes the first instruction to be executed in handling the 
interrupt request to the processor to be specific to that vector. Therefore, the interrupt exception handler is 
specific to a peripheral or software configurable interrupt request rather than being common to all of them. 
The INTC uses hardware vector mode for a given processor when the associated HVEN bit in the 
INTC_MCR is asserted. The hardware vector enable signal to the associated processor is driven as 
asserted. When the interrupt request to the associated processor asserts, the interrupt vector signal is 
updated. The value of that interrupt vector is the unique vector associated with the preempting peripheral 
or software configurable interrupt request. The vector value matches the value of the INTVEC field in the 
INTC_IACKR field in the INTC_IACKR, depending on which processor was assigned to handle a given 
interrupt source.

The processor negates the interrupt request to the processor driven by the INTC by asserting the interrupt 
acknowledge signal for one clock. Even if a higher priority interrupt request arrived while waiting for the 
interrupt acknowledge, the interrupt request to the processor will negate for at least one clock.

The assertion of the interrupt acknowledge signal for a given processor pushes the associated PRI value in 
the associated INTC_CPR register onto the associated LIFO and updates the associated PRI in the 
associated INTC_CPR register with the new priority. This pushing of the PRI value onto the associated 
LIFO and updating PRI in the associated INTC_CPR does not occur when the associated interrupt 
acknowledge signal asserts and INTC_SSCIR0_3–INTC_SSCIR4_7 is written at a time such that the PRI 
value in the associated INTC_CPR register would need to be pushed and the previously last pushed PRI 
value would need to be popped simultaneously. In this case, PRI in the associated INTC_CPR is updated 
with the new priority, and the associated LIFO is neither pushed or popped.

21.4.1.3

Debug mode

The INTC operation in debug mode is identical to its operation in normal mode.

Содержание MPC5602S

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MPC5602S

Hach SC1500 User Manual preview
SC1500
Бренд: Hach Страницы: 86
Icar RPC 8BGA Operating Manual preview
RPC 8BGA
Бренд: Icar Страницы: 40
Icar RPC 8BGA Complete Manual preview
RPC 8BGA
Бренд: Icar Страницы: 86
Icar RPC 8BGA Instruction Manual preview
RPC 8BGA
Бренд: Icar Страницы: 39
IDTECK iTDC Troubleshooting Manual preview
iTDC
Бренд: IDTECK Страницы: 94
M-system SC100 Series Applications Manual preview
SC100 Series
Бренд: M-system Страницы: 103
M-system MSP40 Instruction Manual preview
MSP40
Бренд: M-system Страницы: 18
Lattice Semiconductor MachXO5-NX Development Kit Quick Start preview
MachXO5-NX Development Kit
Бренд: Lattice Semiconductor Страницы: 2
Newport MM4005 User Manual preview
MM4005
Бренд: Newport Страницы: 417
Grosvenor Janus C4 485 Installation Manual preview
Janus C4 485
Бренд: Grosvenor Страницы: 5
LEGRAND MRD6 v2 Installation Instructions Manual preview
MRD6 v2
Бренд: LEGRAND Страницы: 10
Pixsys ATR226 User Manual preview
ATR226
Бренд: Pixsys Страницы: 24
SIATA PS0335 XP0/05 Service Manual preview
PS0335 XP0/05
Бренд: SIATA Страницы: 7
Monde Synthesizer Ribbonz User Manual preview
Ribbonz
Бренд: Monde Synthesizer Страницы: 4
Renishaw PHC10-3 PLUS Installation Manual preview
PHC10-3 PLUS
Бренд: Renishaw Страницы: 68
P&B Goldstart MPC2000 Manual preview
Goldstart MPC2000
Бренд: P&B Страницы: 41
Epsolar LS1024RP Instruction Manual preview
LS1024RP
Бренд: Epsolar Страницы: 32
Fisher 67D Series Instruction Manual preview
67D Series
Бренд: Fisher Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды