manualshive.com logo in svg

NXP Semiconductors MPC5602S, Справочное руководство

Микроконтроллер NXP Semiconductors MPC5602S предоставляет высокую производительность и надежность для различных приложений. На нашем сайте вы можете бесплатно скачать Руководство по эксплуатации, чтобы более полно понять возможности этого продукта. Посетите manualshive.com для загрузки.

Поделиться
Скачать
background image

Display Control Unit (DCU)

MPC5606S Microcontroller Reference Manual, Rev. 7

Freescale Semiconductor

425

 

dimension. The HEIGHT is limited to a maximum of 256 pixels, and the total number of pixels cannot 
exceed the number of bits in the cursor RAM (8192 bits).

Bits in the cursor RAM that are 0 become transparent on the panel. Bits that are 1 become fully opaque in 
the color defined in register 3 in the control descriptor for the cursor (CTRLDESCCURSOR_3). The 
DEFAULT_CURSOR_COLOR bit field is in RGB888 format.

There are restrictions on the arrangement of bits in the cursor RAM depending on how the HEIGHT and 
WIDTH bit fields are configured.

•

The rightmost bit in the cursor RAM (bit 31) represents the leftmost pixel on the display.

•

When the cursor size is less than 32 bits, each row of the cursor is contained in a single 32-bit word 
of cursor RAM. The other bits in each row must be filled with zeros.

•

When the cursor width is an integer multiple of 32 bits, the pixels in each row roll from one word 
in the RAM to the next one. The rightmost bit in the first word in the RAM is the top leftmost pixel 
on the display. The leftmost bit in the word represents a pixel that is adjacent to the rightmost bit 
in the next word (in the same row). The leftmost pixel on the next row is the rightmost bit in the 
first word after n words that describe the first row.

•

When the cursor is greater than 32 bits but not an integer multiple of 32, the pixels in each row roll 
from one word into the next one such that the rightmost bit in the first word of the row is the 
leftmost bit on the display. In the final word of the row there are unused bits.

The position of the cursor on the panel is defined by register 2 in the control descriptor for the cursor 
(CTRLDESCCURSOR _2). The register contains two bit fields, POSY and POSX, which determine the 
location of the upper left pixel of the cursor in the x and y axes. Both fields are expressed in terms of the 
number of pixels in each axis. Placing the cursor beyond the panel area is not allowed.

The cursor can be configured to blink at a particular rate when it is enabled. The EN_BLINK, 
HWC_BLINK_ON, and HWC_BLINK_OFF bit fields define the blink behavior. These are in register 4 
in the control descriptor for the cursor (CTRLDESCCURSOR_4). EN_BLINK enables blinking. The 
blinking time is based on the frame rate, and the on and off times are independently configurable. 
HWC_BLINK_ON configures the number of frame refresh cycles for which the cursor is visible. 
HWC_BLINK_OFF configures the number of frame refresh cycles for which the cursor is not visible. For 
a frame refresh rate of 64 Hz, the HWC_BLINK_ON and HWC_BLINK_OFF counters give a range of 
on/off times up to 4 seconds.

The cursor is enabled by setting the CUR_EN bit field in register 3 in the control descriptor for the cursor 
(CTRLDESCCURSOR_3). Visible pixels in the cursor graphic operate independently from the normal 
layer blend process and always replace any other pixel at the same panel location. This has the effect of 
making the cursor the highest priority layer on the panel when it is enabled and where it contains visible 
pixels.

If the DCU detects an invalid configuration in the cursor control descriptor, then the cursor configuration 
is invalid and it cannot be made visible. In addition, the error flag HWC_ERR is set in the layer parameter 
error register (PARR_ERR).

The cursor RAM may be written at any time when the TFT LCD panel is not being driven with data. This 
means that the RAM can be modified when the DCU is not enabled and during the vertical blanking period. 

Содержание MPC5602S

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MPC5602S

Balboa Instruments EL Series Hot Sheet preview
EL Series
Бренд: Balboa Instruments Страницы: 10
Uniteck UNISOLAR 20.24 Manual preview
UNISOLAR 20.24
Бренд: Uniteck Страницы: 46
RADEMACHER Troll Comfort Instruction Manual For The Electrical Connection And For Commissioning preview
Troll Comfort
Бренд: RADEMACHER Страницы: 112
Newport i/8 Quick Start preview
i/8
Бренд: Newport Страницы: 2
Samson 46-5 Mounting And Operating Instructions preview
46-5
Бренд: Samson Страницы: 24
YOKOGAWA UT32A-C Operation Manual preview
UT32A-C
Бренд: YOKOGAWA Страницы: 10
HomeMatic HM-LC-Dim1T-DR Installation And Operating Manual preview
HM-LC-Dim1T-DR
Бренд: HomeMatic Страницы: 68
Danfoss PVE 4 Series Technical Information preview
PVE 4 Series
Бренд: Danfoss Страницы: 56
3Ware 720-0104-00 Manual preview
720-0104-00
Бренд: 3Ware Страницы: 50
SATA air regulator belt plus Operating Instructions Manual preview
air regulator belt plus
Бренд: SATA Страницы: 158
Resol DeltaSol SLL Installation, Operation, Maintenance Manual preview
DeltaSol SLL
Бренд: Resol Страницы: 60
CS-Lab CSMIO/IP-A Tuning Manual preview
CSMIO/IP-A
Бренд: CS-Lab Страницы: 20
Gewiss Chorus GWA1521 Technical Manual preview
Chorus GWA1521
Бренд: Gewiss Страницы: 13
DIODE LED DI-DMX-WIFI-WMDC-1ZWH Installation Manual preview
DI-DMX-WIFI-WMDC-1ZWH
Бренд: DIODE LED Страницы: 5
Omega Engineering Wireless Meter Scanner & Controller wi... User Manual preview
Wireless Meter Scanner & Controller wi...
Бренд: Omega Engineering Страницы: 96
Genie KB-4002-JS User Manual preview
KB-4002-JS
Бренд: Genie Страницы: 18
Verdin DBC 870 User Manual preview
DBC 870
Бренд: Verdin Страницы: 37
Acclaim Lighting Art IO Manual preview
Art IO
Бренд: Acclaim Lighting Страницы: 41

Бренды по названию

Популярные бренды

Загрузить еще бренды