Nussbaum ATT Liga C 253, Инструкция по эксплуатации

Страница: 26 / 92

26
ENGLISH • Instructions manual
TC 355 - Liga C 253 TC 355 - Liga C 253
9. CORRECT OPERATION CHECKS
Once the connections described above have been made (See “Installation”), check to make sure the tyre changer works properly by carrying
out the following procedures:
1)
Press pedal (
1, Fig. L
) down to its middle position (
see Fig. M1
): the table top (
2, Fig. L
)
should turn clockwise at the low speed; press the pedal all the way down (
see Fig. M1
): the table
top should turn clockwise at high speed; pull the pedal up (
see Fig. M1
): the table top should
turn anticlockwise.
2)
Open the bead loosener arm (
4, Fig. L
) manually and depress the bead loosener pedal (
3, Fig.
L
): the bead loosener will close.
WARNING:
Unreadable and missing warning labels must be replaced immediately.
Do not use the tyre changer if one or more labels are missing.
Do not add any object that could prevent the operator from seeing the labels.
Use the code in this table to order labels you need.
clockwise (1-speed)
0
anti-clockwise
clockwise (2-speed)
M1
CODE 4-402838
CODE 4-402938
CODE 3014095
CODE 3014056
CODE 4-402837
CODE 3014057
CODE 3020244