Nugen S10KS, Руководство по техническому обслуживанию оператора

Страница: 39 / 64

OPERATOR & MAINTENANCE MANUAL
PAGE ‐ 35
CAUTION:
Pay close attention to ventilation when operating the generator inside confined spaces and
enclosed areas. The engine exhaust contains noxious elements. Engine exhaust must be
routed to a ventilated area.
4.5 Outdoor Installation
Install the generator in an area that is free of debris, and overhead obstructions. Make sure
the generator is on secure level ground so that it cannot slide or shift around. Also install the
generator in a manner so that the exhaust gases will not be discharged in the direction of
nearby buildings.
The installation site must be relatively free from moisture and dust. All electrical equipment
should be protected from excessive moisture. Failure to do so will result in deterioration of
the insulation and will result in short circuits. Foreign materials such as dust, sand, lint and
abrasive materials have a tendency to cause excessive wear to engine and alternator parts.
The canopy is designed to provide cooling and ventilation for the generator. Several factors
should be carefully considered when selecting a location for installation.

For effective cooling and maintenance, the generator should be mounted on a hard,
flat, non ‐ combustible, level surface. A concrete pad is ideal and provides a secure
installation.

The installation area should be well ventilated.

Drainage must be adequate to ensure the concrete pad is free from standing water.

Installation should prevent build ‐ up of leaves, grass, sand, snow etc.

Serviceable access should be provided to allow the opening or removal of access
panels/doors for service and maintenance.

Keep the generator at least one metre away from buildings and other structures.