Nugen S10KS, Руководство по техническому обслуживанию оператора, Страница: 19 / 64

OPERATOR & MAINTENANCE MANUAL
PAGE ‐ 15
TABLE 4: CONTROL CABINET
REF NAME DESCRIPTION
1
Terminals DC 12V
2 Relays DC 12V
3 Circuit Breaker 16A 1P
4 Circuit Breaker 32A 1P
5 Circuit Breaker 6A 1P
6 Relays DC 12V (start relay and fuel start relay)
7 Cable Duct
8 Battery Charger
9 DC Regulator Module
10 Terminals AC 240V
11 RCD Test Point
12 Earth Bar
13 Neutral Bar
14
AMF/Island Mode
Selector Switch
Refer to Note 1
15 RCD/MCB Combo 10A 2P (Protects the battery charger)
16 Earth leakage relay Schneider Vigirex RH99P (Din mounted)
17
Double action RCD
bypass switch
Refer to Note 2
Note 1: With the switch in AMF mode, the controller will be in Automatic Mains Failure
function. With the switch in ISLAND mode, the generator can be remotely started by closing
the remote start terminals.
Both AMF and Remote Start require the Intelilite AMF 25 Controller to be in AUTO mode.
NOTE 2: The RCD bypass switch has a protective cap to prevent accidental operation. The
machines are delivered with the switch in the off position and the cap down. In this
configuration the adjustable earth leakage relay (16) will monitor any earth leakage current.
If a leakage current greater than the relay setting is detected the shunt trip will trip the Main
Circuit Breaker. When the RCD bypass switch is on and the cap is in the up position, the earth
leakage relay will be bypassed.
This operation must only be carried out by a licensed electrician.