Nugen S10KS, Руководство по техническому обслуживанию оператора

Страница: 52 / 64

OPERATOR & MAINTENANCE MANUAL
PAGE ‐ 48
5.2.2 Fuel
Remove the fuel inlet cap and check the fuel level in the tank.
Adding Fuel:

Select the correct fuel.

Loosen the fuel inlet cap and remove it.

Fill the fuel through the inlet until the fuel is slightly
less than the full ‐ tank level

Tighten the fuel inlet cap.
5.2.3 Coolant
Remove the radiator cap, check coolant level
in the tank.
Adding Coolant:

Remove the coolant inlet cap.

Remove the radiator cap.

Fill coolant up to the radiator inlet top.

Reinstall and tighten the coolant inlet and
radiator caps.
WARNING:
Avoid injury! The coolant will be hot and can burn skin. Built ‐ up pressure may cause
explosive release of coolant when the radiator cap is removed. Shut off engine and
allow it to cool. Do not remove cap unless the radiator and the engine are cool to
touch with bare hands. Slowly loosen the cap to the first stop to release all pressure,
then remove cap.
CAUTION:
1. Do not smoke while you are refuelling an engine.
2. Do not refuel an engine near open flames or sparks.
3. Always stop the engine before refuelling.