NuAire NU-5710, Руководство по эксплуатации и обслуживанию

Страница: 45 / 64

OM0249 Page 45 of 64
Rev 4 June/2020
Note:
•
CO
2,
RH and O₂ control systems will be idle during the cycle.
•
Protection of the CO
2
and O₂ sensors during the heated cycle is automatic.
•
RH sensor must be removed from all models equipped with RH control the as stated in the Preparation section and
in the NuTouch screen prompts that show during the startup of the cycle. The sensor will be damaged if it is not
removed.
•
The Decon Cycle will not advance to the heat up phase unless the door is opened.
•
Follow the on screen instructions, pressing the Next button when each step is completed
Start the decon cycle by following the prompts on the NuTouch display screen.
The decon cycle will automatically go through the following phases:
HEAT UP
2 hours on average

Complete the chamber preparation and
either schedule a start time or press the
Start button to start the heat up portion of
the cycle.
• Temperature display shows chamber
temperature.
•
Text displays that the unit is currently in the
Heating Up cycle
• A timer tracks how long the unit has been
heating thus far
DECONTAMINATION
3 hours

The unit automatically starts a countdown timer for the correct length of cycle when the decontamination
temperature is reached.
•
Temperature display shows chamber temperature.
•
Text displays that the unit is currently in the Decontamination cycle.
COOL DOWN & STABILIZING 4 hours

When the decontamination period is complete the heaters are shut off and the air pump is turned on
blowing HEPA filtered air to cool the chamber to the user chosen temperature set point.
• Temperature display shows chamber temperature during cycle.
• Text displays that the unit is currently in the Cooling Down portion of the DECON cycle
• A count up timer (incrementing time) tracks how long the unit has been cooling down
37
145
TIM
E
1:
00:
00
2:
00:
00
3:
00:
00
4:
00:
00
5:
00:
00
6:
00:
00
7:
00:
00
8:
00:
00
9:
00:
00
10:
00:
00
TEM
PERA
TURE
DEG
C
TIME (HRS:MIN:SEC)
DRY 145
°
C DECON CYCLE