Nu-Flame The Icona 600 H.E., Инструкция по использованию, установке и обслуживанию

Страница: 4 / 50

4
1. - IMPORTANT NOTES
a. This appliance must be installed by a properly qualified (in accordance with National & Local Regulations) Installation Engineer.
b. The connection of this appliance and ventilation requirements (if any) are to be according to National & Local Codes.
c. For appliance fitted in the UK they do not normally require any purpose provided additional ventilation, however if it has been
found necessary to add a vent, (or a vent is fitted as required in IE), periodically check that it is free from obstruction.
d. Consult all Instructions before Installation and Use.
e. Do not throw rubbish on, or attempt to burn any materials on this appliance. Any Debris or Foreign Matter must be removed from
the fire.
f. The outer parts of this fire will become hot during use, cloths or combustible items must not be placed close to or on the fire. We
recommend that a Fireguard conforming to BS8423 should be used for protection of Young Children the Elderly, Infirm and Pets.
g. For Fires Installed above floor level, (Hole in the wall Fires), it is recommended that a means, (tactile separator/shelf or guard) is
provided to give abrupt warning to a person moving inadvertently towards the fire.
h. The appliance should be Serviced Annually in accordance with the Gas Safety & Uses Regulations.
i. Where the flue has been used for Solid Fuel it must be swept before Installation.
j. If at any time you smell gas or fumes turn the fire off and contact your Installer.
k. These Instructions must be left with the User for future reference.
l. During its first period of use any protective coatings and oils will burn out of the appliance and it is wise to ventilate the room for
the first hour of use.
m. This appliance is fitted with an oxygen depletion sensing system, which automatically shuts off the gas supply to the fire if the
oxygen level in the room is depleted, due to lack of primary air, or obstructed flue (blocked chimney) that would lead to
incomplete combustion of the gas. It must not be tampered with and only replaced with a genuine Nu-Flame ODS.
n. In the event that the fire shuts down for any reason, attempt to restart it. If there is a continuing problem, call in a properly
qualified specialist engineer.
o. There are no user replaceable parts in the appliance apart from the batteries for the Thermatronic Radio Frequency Electronic
Control System.
p. The Batteries may need to be changed every 6months dependant on usage of the fire.
q. If any modifications are made to the property, e.g. double glazing addition of extraction fans or anything that could affect
ventilation then the Installer should be contacted to have the spillage performance carried out to ensure the fire is clearing its
products of combustion.
r. The chimney should be regularly checked to ensure that all the products of combustion are entering the flue & that there is no
build up of soot. If there is, the appliance must be serviced.
s. Wood, Coal or Pebble fuel effects, manufactured from refractory fibre, are supplied with this appliance. Do not use real
wood ,coals or pebbles as this is dangerous. If the simulated fuel bed components need renewing please obtain suitable
replacements from a Nu-Flame Stockist. Light coloured Fuel Effect pieces like Pebbles can be prone to discolouration, this is
quite normal.
t. The fire must be installed in accordance with the rules in force and these Instructions it must be installed into a fireplace or
builders opening as detailed in these Instructions.
u. No combustible materials e.g. curtains must be closer than 500mm to the fire.
v. For Fire Surround/Shelf Applications a 150mm (6”) combustible shelf can be fitted above the fire provided it is 150mm above the
Fireplace Opening. See Sections 14 or 15 for more detail.
w. The Fire can be installed into a suitably designed fire surround with a 150
º
C Rating.
x. Take care with some Micro Marble Materials claiming a 150 Centigrade Rating as they may give off odours, blister or discolour.
y. Please note that over time some wall staining will occur above the fire and this is due primarily to particles of dust
present in the hot convection air circulating up and over the fire/surround and sticking to the wall.
z. If a Wall Mounted Television is mounted above the fire you must take account of the Television Manufacturers Instructions.
The Installation requirements provided with these Instructions must be adhered to for such installations and are provided to
ensure an acceptable ambient temperature is provided above the fire.
It is quite normal for the fire to make popping and burbling sounds when in use, as would a
solid fuel fire.
ICONA 600H.E.
USER INSTRUCTIONS