Nu-Flame The Icona 600 H.E., Инструкция по использованию, установке и обслуживанию

Страница: 3 / 50

3
THE ICONA 600 H.E. - FITTING KIT CONTENTS:
Note: The Icona 600HE as a separate Battery Cassette fitted in the left of the Firebox. Simply slides upward.
Cable Fixing Kit (2 # cables and fittings, 2 Brackets with Screws, 4 # eyebolts, 4 # screws and 4 # plastic plugs).
1 # Firebox Support Bracket Assemblies plus Rawl plugs and Screws.
1 # Flue Restrictor.
1 # Flue Hood (For Convectional Flues the Flue Hood will have been ordered).
or
1 # Flue Canopy (For Liner Flue Applications the Flue Hood will have been ordered).
15 # No.6 x 10mm pointed self tapping screws for the Restrictor, Baffle Assembly, Flue Hood or Canopy.
1 # Baffle Assembly.
1 # Set of Left Hand & Right Hand Metal Firebox Liners.
1# Burner Box Assembly (complete with Burner Tray Assembly).
1# Battery Cassette (at the left, simply pushed in so Slides out Upward, once clear remove Battery Holder and Lead)
4 # Magnets for holding Front Trim on ( Note: No Magnets required for Trimless Models).
1# Chosen Trim Style Assembly (Numerous Finishes & Sizes) (Grande trim will have 4 additional Magnets).
1 # 2,100mm length of 6mm x 4mm self adhesive silicone sealing strip.
1 # 10mm Back Nut & olive to connect 8mm copper pipe gas supply to the burner (via the isolation elbow).
1 # Chosen Rear Liner Pack, (Matt Black, Light Board or Slate Wall Effects).
1 # Chosen Trim Assembly (Harmony, Deluxe, Grande or Concept). (No Trim required for Trimless Models).
1 # Fuel Effect Set, Wood Effect (Log effect or Driftwood effect), Pebble Effect or Coal Effect.
1 # Remote Control Handset.
1 # PP3 9 volt Battery for Handset.
4 # AA Batteries for the Battery Box.
1 # Set of Instructions / Warranty.
Optional Extra’s for Trimless Fire Installations with Separate Instructions
Edge Kit for Trimless Fires with Surround Back Panels (Covers gap between Inner Wall and Back Panel)
Edge Kit for Trimless Fires (Edge Kit provides a frame around inner edge of Plaster Board to Plaster up to)
Due to the combined thicknesses of the fires flanges, seal and fixings a gap will be present behind the Plaster Board or
Fire Surround Back Panel. The Edge Kits are provided to cover these gaps and for Plaster Board applications provide
a leading edge to plaster up to.