NPM PPCI7443, Руководство пользователя

Страница: 20 / 183

12
•
Installation
2.7 CN3 Pin Assignments: Manual Pulser Input
The signals on CN3 are for manual pulser input.
No. Name Function(Axis )
1 GND Bus power ground
2 PB4 Pulser B-phase signal input,
3 PA4 Pulser A-phase signal input,
4 PB3 Pulser B-phase signal input,
5 PA3 Pulser A-phase signal input,
6 +5V Bus power, +5V
7 GND Bus power ground
8 PB2 Pulser B-phase signal input,
9 PA2 Pulser A-phase signal input,
10 PB1 Pulser B-phase signal input,
11 PA1 Pulser A-phase signal input,
12 +5V Bus power, +5V
Note: +5V and GND pins are directly given by the PCI-Bus power.
Therefore, these signals are not isolated.
2.8 CN4 Pin Assignments: Simultaneous
Start/Stop
The signals on CN3 are for simultaneously start/stop signals for multiple
axes and multiple cards.
No. Name Function(Axis )
1 GND Bus power ground
2 STP Simultaneous stop signal input/output
3 STA Simultaneous start signal input/output
4 STP Simultaneous stop signal input/output
5 STA Simultaneous start signal input/output
6 +5V Bus power, +5V
Note: +5V and GND pins are directly given by the PCI Bus power.