NPK G015, Инструкция по эксплуатации

Страница: 33 / 60

- 32 -
INSTALLATION INSTRUCTIONS
G025
For NPK 2,500 to 15,000 ft. lb. class hammers
1. The grease pump should be mounted
so that the grease cartridge (a54) in
the vertical position when the hammer
is in operation. It must be ensured that
neither dirt nor any other type of
contamination may fall into the intake
area below the cartridge when the
cartridge is being re-filled.
2. Remove the existing adapter fittings
from the grease pump assembly.
Install one ORFS adapter fitting (g19),
NPK part number L1213-6600, into the
port labeled “P
OIL
” ( 126 ) and one check
valve (k3b), NPK part number G025-
6300 into port “R
OIL
” ( 127 ). Plug (g12)
port “P
GREASE
”. Remove the plug from
the grease outlet port ( 18 ) closest to
the right side of the front of the pump
assembly. Install check valve (k3a),
NPK part number G100-6300.
3. Place the Auto Lube pump assembly
(FZ) and mounting plate (a28) in NPK’s
suggested position. Loosely install the
grease line and the pressure and
return hoses to the hammer and
hammer bracket. Tack weld the
mounting plate, NPK part number
G025-2000 to the upper support block
(FV).