Novexx ALX 924 Скачать руководство пользователя страница 64

Страница: 64 / 91

User Manual

ALX 92x

09/2016 | 00

Startup and Operation

SWITCHING ON/OFF

Switching on

1. Move the mains power switch [55A] of the machine

to "I" (On).

2. Keep the On/Off switch [56A] on the control panel

pressed for approx. 2 seconds.

The machine starts up. Afterwards the machine is in on-
line mode. Display:



CAUTION! - Wait at least 10 seconds between

switching the device off and on again, otherwise any
modified parameter settings are not saved.

Switching off



Move the mains power switch [55A] of the machine

to "O" (Off).
The machine shuts down.

WARNING!

Only

by disconnecting the plug from the

mains supply is the machine fully dis-
connected from the supply. Therefore:



Keep mains connection freely acces-

sible.



In case of danger switch off the ma-

chine and unplug the power cable.

ONLINE X JOBS

[55] Mains power switch (A) at the ALX 92x.

[56] On/Off switch (A) on the control panel.

PROG

FEED

ONLINE

APPLY

ERROR

Содержание ALX 924




























































































Результаты поиска

Содержание ALX 924

Отзывы:

Бренды по названию

Популярные бренды

Novexx ALX 924, Руководство пользователя

Результаты поиска

Содержание ALX 924

Отзывы:

Бренды по названию

Популярные бренды