Novexx ALX 924, Руководство пользователя

Страница: 29 / 91

User Manual
ALX 92x
09/2016 | 02 29 Product description
The effect of ribbon saving depends on the print speed. The reason for this is the up and down
movement of the print head as well as the acceleration and slowing-down of the ribbon. Generally
said: With a high print speed, less ribbon is saved as with a low print speed (Tab. 9).
Cutting or dispensing applications can additionally deteriorate the effect of ribbon saving.
Activate the automatic ribbon saving: See parameter SYSTEM PARAMETER >
Ribbon autoecon.
.
Setting the minimum distance between two print areas from which on ribbon saving should be ac-
tivated: See parameter
SYSTEM PARAMETER > Ribb. eco. limit
.

Mind the minimum length of unprinted area, see Tab. 9.
Print speed
in mm/s (Inch/s)
Minimum length of
unprinted area
in mm
Consumed ribbon per
saving action
in mm
51 (2) 3.7 1.2
76 (3) 4.6 1.9
102 (4) 5.9 3.1
127 (5) 7.4 4.4
152 (6) 8.9 5.9
178 (7) 11.1 7.6
203 (8) 14.1 9.5
229 (9) 17.6 11.3
254 (10) 21.3 13.6
279 (11) 25.3 15.9
305 (12) 30.0 18.5
330 (13) 34.5 21.2
356 (14) 39.9 24.2
381 (15) 45.6 27.3
406 (16) 51.3 30.5
[Tab. 9] The amount (length) of consumed ribbon per saving action (lifting and lowering of the print head) increases with
the print speed.
CAUTION! - If huge ribbon rolls (run length of 1000m) are supposed to be used with
activated ribbon economy function, there is a hazard of the ribbon tearing off.

Consider the limitations according to Tab. 10 and Tab. 11!
Ribbon type 2240-600-...
Ribbon width 030 055 080 104
Max print speed with ribbon economy activated
(inch/s)
12 12 12 12
Release the ribbon brake ... turns
1
1) Tighten the red hex nut at the unwind mandrel to the limit and then loosen it the indicated number
of turns.
12 8 6 6
[Tab. 10] Limitations for ribbon type 2240-600-…, depending on the ribbon width.