Novexx ALX 924, Руководство пользователя

Страница: 45 / 91

Bedienungsanleitung
WACTR
09/2016 | 01 45
PRINT PARAMETERS menu
Print speed
Print speed
The print speed (material feed) can be adapted to the combination of ribbon and material in use to
optimise the contrast intensity and the degree of blackening of the print image.
Setting range: [2…16] inch/s; presetting: 8 inch/s
Feed speed
Feed speed
The feed speed can be increased in areas with no print. This reduces the overall print time, espe-
cially for long labels with very little printed surface.

When the print speed is changed, the feed speed is set equal to the print speed. If a different
feed speed is preferred, it must be set again.
Setting range: [2…12] inch/s; presetting: 8 inch/s
Materialtype
Definition of the label material in use.
Settings: [Endless, Punched ]
• Endless: The label material has no punches or reflex markings. The start of the label is calcu-
lated by the set label length ( PRINT PARAMETERS > Materiallength ).
• Punched: The individual labels in the label material that is used have punches or reflex mar-
kings that can be detected by the label sensor.
Materiallength
Label length, measured from the front (beginning) of a label to the front of the next label.
Setting range: [5…max. length
1
] mm; presetting: 100 mm
Materialwidth
Width of the label belt (including backing paper in the case of self-adhesive material).
Setting range: [Min. width
2
…Max. width
3
] mm; presetting: 100 mm
1) "Max length": depends on the printhead width and memory configuration.
2) "Min. width": depends on the type of printer
3) "Max. width": depends on the printhead width and memory configuration of the printer