manualshive.com logo in svg

Novexx ALX 924, Руководство пользователя

Поделиться
Скачать
Novexx ALX 924 Скачать руководство пользователя страница 76

User Manual  

ALX 92x

09/2016 | 00

76

Cleaning & Maintenance

Cleaning the printhead

Paper dust and coloured particles from the thermal 
transfer ribbon may collect on the printhead during 
printing. Over time, this can significantly impair the 
printing quality in the following ways:

• Contrast differences in label
• Bright strips in printing direction

Cleaning interval

• Thermal transfer print: every time the ribbon roll is 

changed

• Direct thermal print: every time the label roll is 

changed

Preparing the printhead

1. Switch off the machine.
2. Unplug the mains power connecting line.
3. Remove the label material and ribbon.
4. Remove both wing bolts [60A] until the printhead 

can be swivelled up.

Before swivelling the printhead up, shift it about 

1 cm towards the middle of the axle.

If the printhead is not at the limit stop on the 

side, mark the position on the axle in advance.

5. Rotate the printhead up [61].

WARNING!

Burn hazard! The printhead can become 
hot during operation.

Be careful whenever touching the 

printer.

[60] Wing screws (A) on the printhead.

[61] Rotate the printhead up.

A

Содержание ALX 924




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды