03/10 Rev. 5.04-01
USER MANUAL
LA-BO
Mounting & Setting
Safety Instructions ........................................ 1
Mounting on an ALX 92x ............................... 2
Required components ............................... 2
Required tools ........................................... 2
Fitting the applicator .................................. 3
Adjusting the dispensing edge to the vacuum
grid .......................................................... 4
Parameter settings on the ALX 92x .......... 4
Mounting on an ALS 20x/256 ........................ 5
Required components ............................... 5
Required tools ........................................... 5
Fitting the applicator .................................. 6
Adjusting the dispensing edge to the vacuum
grid .......................................................... 7
Parameter settings on the ALS 20x/256 .... 8
Adjusting the labelling application height .... 10
Adjusting the LA-BO to the used
label material ............................................... 11
Adjusting the sliding bars in the
vacuum grid ........................................... 11
Adjusting the air nozzles in the
vacuum grid ........................................... 13
Adjusting the air stream support .............. 14
Setting the dispensing position
parameter .............................................. 15
