03/10 Rev. 5.04-01
USER MANUAL
Mounting & Setting
LA-BO
10
Adjusting the labelling application height
In general, to obtain a good apply accuracy of the label on the product, it is
recommended to adjust the LA-BO as close as possible to the product sur-
face. Obviously a safe distance has to be respected so the conveyed prod-
ucts can not come in contact with the parts of the LA-BO, especially the blow
pipe for air stream support (see p.16).
Variations in product height also have to be considered when adjusting the
height of the LA-BO.
The labelling distance of the LA-BO to the product surface may vary between
20 mm and maximum 100 mm.
[Fig. 12]
Labelling distance between LA-BO and product.
