03/10 Rev. 5.04-01
USER MANUAL
Mounting & Setting
LA-BO
1
Safety Instructions
y
When mounting, dismounting or servicing the LA-BO, make sure the labelling
head ALX 92x or ALS 20x/256 and the air pressure are switched off!
y
The operating air pressure must be at least 5 bars and no more than 6 bars.
y
The applicator may only be assembled and commissioned by qualified
personnel.
y
The applicator housing may only be opened by authorized technicians.
y
Repairs to the applicator may only be performed by authorized technicians
who are aware of the risks involved!
y
Check the applicator regularly for defective parts. Replace defective parts
immediately and only by original spare parts provided by the manufacturer.
By doing so, you avoid hazards caused by spare parts of low quality.
y
The applicator construction must not be modified (e.g. by installing a larger
pneumatic valve). Unauthorized modifications, changes or improper usage
exclude all liability on the part of the manufacturer for damage resulting there
of.
WARNUNG!
The applicator uses a large air flow to blow off the label which is held at the
bottom side of the applicator.
«
Don’t look straight in to the vacuum grid of the running applicator, to avoid
that dust or label residues are blown into your eyes.
«
When setting the applicator: make sure that the applicator cannot be trig-
gered unintentionally.
