Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 674

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Скачать руководство пользователя страница 76

76

Novell ZENworks 7.2 Linux Management Administration Guide

n

ov

do

cx (e

n)

11
Ju

ly 20

08

5

Configure the following settings to register the managed devices and upload their basic
hardware inventory information to Novell Customer Center:

Select

Enable link-up with Novell Customer Center

.

This enables the server to periodically transmit information about itself and its managed
devices to Novell Customer Center.

In

Update Interval (Hrs)

, specify how often the server must send information to Novell

Customer Center. By default, the interval is 3 hours.

6

Click

Apply

, then click

OK

.

NOTE:

To view the information uploaded by the ZENworks Linux Management Satellite server,

ensure that the Novell Customer Center account is created before registering the ZENworks Linux
Management Server to Novell Customer Center.

7.12 Configuring the ZENworks Server

Preferences

ZENworks Server preferences are used to control events triggered from managed device as well as
from ZENworks Server. These preferences are configured by default. The following preferences are
available for the ZENworks Linux Management Server:

allow-rebuild:

Enables or disables the rebuild action of the managed device during the device

registration process. The default value is False.

compute-package-device-updates:

Enables or disables both Package Updates and Device

Updates Queue actions triggered on the ZENworks Server. The default value is True.

show-updates-icon:

Enables or disables the Updates icon for devices displayed under the

Devices

tab. The default value is True.

store-file-deps:

Enables or disables filtering of RPM Package dependency metadata. The

default value is True.

You can only edit the value of the preferences.

To edit the ZENworks Server preferences:

1

In the ZENworks Control Center, click the

Configuration

tab.

2

Click

ZLM Server Preferences

.

The ZENworks Server Settings page displays the preferences configured for the server.

3

Click

Edit Preferences

to display the Configure Server Preferences dialog box.

«
...
74
75
76
77
78
...
»

Содержание ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008



































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов