Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Руководство администратора

Страница: 116 / 674

116 Novell ZENworks 7.2 Linux Management Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
IMPORTANT: If you delete a device object in the ZENworks Control Center but do not
unregister the device, when the device is refreshed according to its schedule or if the user runs
the
rug refresh
command, the device reregisters and a corresponding device object is re-
created in the ZENworks Control Center. If you no longer want to manage the device using
ZENworks Linux Management, ensure that you unregister the device, as explained below.
When you unregister a device, the ZENworks Agent software remains on the device. You can
leave the ZENworks Agent on the device in case you want to reregister it, or you can uninstall
the ZENworks Agent. For more information, see
Section 6.4, “Uninstalling the ZENworks
Agent,” on page 66 .
13.2 Unregistering Devices
To unregister a device, run the
rug sd
command from the device.
For SUSE Linux Enterprise Server 10 (SLES 10) and SUSE Linux Enterprise Desktop 10 (SLED10)
managed devices:
/usr/bin/rug sd
For other managed devices:
/opt/novell/zenworks/bin/rug sd
You can also unregister a device by using the Software Installer or Updater. For more information,
see
Section 6.3, “Using the Software Updater, Installer, and Remover from Users’ Managed
Devices,” on page 54 .
13.3 Reregistering Devices
To reregister a device, run the
rug sa
command from the device.
For SUSE Linux Enterprise Server 10 (SLES 10) and SUSE Linux Enterprise Desktop 10 (SLED10)
managed devices:
/usr/bin/rug sa https:// ZEN_Server_address
For other managed devices:
/opt/novell/zenworks/bin/rug sa https:// ZEN_Server_address
Replace ZEN_Server_address with the IP address or DNS name of the primary or secondary server.