Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Руководство администратора

Страница: 227 / 674

Using RPM and File Bundles 227
n
ov
do
cx (e
n)
11
Ju
ly 20
08
As part of the process of distributing a bundle, ZENworks Linux Management can launch
scriptable actions that will be executed before and after the bundle is distributed, installed, and
uninstalled. For example, you can get data files from a Web server before installing an
application that uses them, run applications, and so forth.
NOTE: You can configure multiple scripts for each bundle. Repeat the configuration process
as many times as desired, choosing different options from the Scriptable Action and Executable
Type drop-down lists, explained below.
8 Click New to display the New Scriptable Action dialog box.
9 Fill in the fields:
9a Scriptable Action: Select one of the following actions:
Š
Pre-distribution/post-distribution: Lets you perform tasks that must be done
before or after a bundle is deployed to assigned devices. Deploying a bundle means
that the packages or files inside the bundle are downloaded from the ZENworks
server to the assigned devices. The packages and files are not yet available for use.
Š
Pre-installation/post-installation: Lets you perform tasks that must be done before
or after a bundle is installed. Installing a bundle means that the software packages
and files are installed to assigned devices and available for use.
Š
Pre-uninstallation/post-installation: Lets you perform tasks that must be done
before a bundle is uninstalled. Uninstalling a bundle means that the software
packages and files are uninstalled on assigned devices and no longer available for
use.