manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Руководство администратора, Страница: 574 / 674

Поделиться
Скачать
Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Скачать руководство пользователя страница 574

574

Novell ZENworks 7.2 Linux Management Administration Guide

n

ov

do

cx (e

n)

  11
 Ju

ly 20

08

-y,--no-confirmation - Does not prompt for confirmation. 
-p,--prepare-only - Only prepare bundles, do not install. 
-f,--freshen - Freshens children. 
-r,--allow-removals - Removes all conflicting packages. 
-N,--dryrun - Tests and displays, but does not actually perform the requested actions. 

NOTE: 

The -N and -r options are not applicable for File bundles.

bundle-search (bse) [options] [querystring]

 

Searches for bundles matching the query string. Accepts the following option flags: 

-i,--installed-only - Searches only the list of installed bundles.
-s, --show-name - Shows the actual name of the bundle.
-g, --show-guid - Shows the GUIDs of the bundle.

bundle-types (bt) [options]

 

Lists the available bundle types. 

bundle-upgrade (bup) [options]

 

Upgrades the bundles. Accepts the following option flags: 

-y,--no-confirmation - Does not prompt for confirmation. 
-p,--prepare-only - Only prepares bundles, does not install. 
-f,--freshen - Freshens children.
-r,--allow-removals - Removes all conflicting packages. 
-N,--dryrun - Tests and displays, but does not actually perform the requested actions. 

NOTE: 

The -N and -r options are not applicable for File bundles.

catalogs (ca) [options]

 

Lists the catalogs available for the services you have added. Accepts the following option flags:
-u, --uri - Show the service uri.

subscribe (sub) [options] [catalogname] [...]

 

Subscribes to the specified catalogs. Each specified catalog must be available from one of the 
services you have added. Accepts the following option flags: 

-s,--strict - Fails if attempting to subscribe to a subscribed catalog. 
-a,--all - Subscribes to all catalogs.
-e, --service - Specifies the service.

unsubscribe (unsub) [options] [catalogname] [...] 

 

Unsubscribes the specified catalogs. Accepts the following option flags: 

-s,--strict - Fails if attempting to unsubscribe from an unsubscribed catalog. 
-a,--all - Unsubscribes to all catalogs. 
-e, --service - Specifies the service.

Содержание ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008



































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов