manualshive.com logo in svg

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Руководство администратора

"Административное руководство Novell ZENworks Linux Management 7.2 IR2 - руководство по администрированию 09-25-2008 доступно для бесплатного скачивания на manualshive.com. Это полезное руководство позволит вам эффективно управлять вашей системой. Скачайте его сейчас и получите всю необходимую информацию для успешного администрирования."

Поделиться
Скачать
background image

Mirroring Software

295

n

ov

do

cx (e

n)

  11
 Ju

ly 20

08

Target

Restricts the mirroring operation on this catalog to packages and patches that 
support the specified target platforms. If no target is specified, packages for all 
platforms are mirrored.

This element can be specified multiple times, and can contain either a target 
name or a regular expression string for wildcard matching of target names.

For example, to include targets beginning with sles such as sles-9-i586, use 
the regular expression 

<Target>

sles.*

</Target>

.

ExcludeTarget

Same as Target, except packages and patches supporting the specified target 
platform(s) are excluded. ExcludeTarget is performed after Target, so 
platforms appearing in a Target and ExcludeTarget are ultimately excluded. 
For example, to exclude targets that end with i586 such as sles-9-i586, use 
the regular expression 

<ExcludeTarget>

.*i586

</ExcludeTarget>

.

Bundle

Restricts the mirroring operation on this catalog to the specified bundles. If not 
specified, all bundles are mirrored.

This option is valid only for ZENworks Linux Management and YAST source 
servers. It can be specified multiple times and can contain either a bundle 
name or a regular expression string for matching bundle names.

LocalBundleName

Renames the bundle name locally. This is applicable only for the RCE, NU, 
and RHN services in which a catalog has only one bundle on the remote 
server. If you specify 

<LocalBundleName>

, you must not specify the 

<Bundle>

 tag. This tag is not applicable when you mirror OES from the RCE 

service with more than one bundle per catalog.

ExcludeBundle

Same as Bundle, except packages and patches contained in the specified 
bundles are excluded.

This option is valid only for ZENworks Linux Management and YAST source 
servers. It can be specified multiple times and can contain either a bundle 
name or a regular expression string for matching bundle names.

ExcludeBundle is performed after Bundle, so bundles appearing in a Bundle 
and ExcludeBundle are ultimately excluded.

Package

Restricts the mirroring operation on this catalog to the specified packages. If 
not specified, all packages are mirrored. This option can be specified multiple 
times, and can contain either a package name or a regular expression string 
for matching package names. This option is not supported for YOU patches.

ExcludePackage

Same as Package, except specified packages are excluded. This option can 
be specified multiple times, and can contain either a package name or a 
regular expression string for matching package names. This option is not 
supported for YOU patches. ExcludePackage is performed after Package, so 
packages appearing in a Package and ExcludePackage are ultimately 
excluded. 

Category

Restricts the mirroring operation on the catalog to the specified categories of 
patch bundles. If the category is not specified, all patch bundles are mirrored. 
Valid values are recommended, optional, and security. This tag is applicable 
only for the NU type servers of SLES 10, SLED 10, and OES 2.

ServicePackGroups

Accepts Boolean values (true or false) only. By default 

<ServicePackGroups>

 is set to true, and it automatically creates bundle 

groups. This option is supported for YOU patches only

Configuration Element

Description

Содержание ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008



































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008

Garmin Pilot User's Android User Manual preview
Pilot User's Android
Бренд: Garmin Страницы: 150
Alcatel-Lucent Wireless Network Guardian 9900 Brochure preview
Wireless Network Guardian 9900
Бренд: Alcatel-Lucent Страницы: 2
M-Audio Fast Track Pro Quick Start Manual preview
Fast Track Pro
Бренд: M-Audio Страницы: 5
Panasonic LightPen3 Operating Instructions Manual preview
LightPen3
Бренд: Panasonic Страницы: 27
Panasonic LUMIX Simple Viewer Operating Instructions Manual preview
LUMIX Simple Viewer
Бренд: Panasonic Страницы: 32
Altigen Call Detail Reporting Manual preview
Call Detail Reporting
Бренд: Altigen Страницы: 97
Altigen Altiware OE 4.5 System Administration & Installation Manual preview
Altiware OE 4.5
Бренд: Altigen Страницы: 455
Meade Autostar II Instruction Manual preview
Autostar II
Бренд: Meade Страницы: 62
3Com 3C19250 - USB Ethernet Network Interface Card User Manual preview
3C19250 - USB Ethernet Network Interface Card
Бренд: 3Com Страницы: 16
AMX APWeb Instruction Manual preview
APWeb
Бренд: AMX Страницы: 34
F-SECURE PSB - ADMINISTRATORS GUIDE FOR CUSTOMERS Manual preview
PSB - ADMINISTRATORS GUIDE FOR CUSTOMERS
Бренд: F-SECURE Страницы: 40
Altigen ACM 6.5 Administration Manual preview
ACM 6.5
Бренд: Altigen Страницы: 502
CAKEWALK REVALVER Manual preview
REVALVER
Бренд: CAKEWALK Страницы: 18
RADVision OnLAN User Manual preview
OnLAN
Бренд: RADVision Страницы: 12
MACROMEDIA FLASH MEDIA SERVER 2-SERVER MANAGEMENT ACTIONSCRIPT... Reference preview
FLASH MEDIA SERVER 2-SERVER MANAGEMENT ACTIONSCRIPT...
Бренд: MACROMEDIA Страницы: 74
Microtek ScanMaker X6 EPP User Manual preview
ScanMaker X6 EPP
Бренд: Microtek Страницы: 15
Microtek ScanPotter Reference Manual preview
ScanPotter
Бренд: Microtek Страницы: 36
FieldServer FS-8704-12 Manual preview
FS-8704-12
Бренд: FieldServer Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды