Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Руководство администратора

Страница: 420 / 674

420 Novell ZENworks 7.2 Linux Management Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
30.2.1 Multicasting in the ZENworks Control Center
Š “Configuring Multicast Bundles” on page 420
Š
“Enabling a Multicast Session” on page 424
Configuring Multicast Bundles
With Preboot Services, multicasting is an automated procedure. As described in “Automatic
Multicasting Example” on page 342 , you simply define a Multicast bundle and assign it to the
devices. The multicast session starts when the trigger event that you configured occurs.
Using ZENworks Linux Management, you can install software using a bundle. Software included in
a bundle that is assigned directly is considered mandatory; the software is installed on all assigned
devices (the bundle is directly assigned to the devices, their groups, or their folders).
To configure a Multicast bundle and assign devices to the bundle:
1
In the ZENworks Control Center, click the Bundles tab.
2 Click New > Bundle to start the Create New Bundle Wizard:
3
In the Create New Bundle Wizard, select Preboot bundle , then click Next to display the Select
Preboot Bundle Type page: