Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Руководство администратора

Страница: 466 / 674

466 Novell ZENworks 7.2 Linux Management Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
You can select multiple files using the Shift and Ctrl keys.
5 Repeat these steps as necessary.
31.8.2 Creating a New Directory
To create a directory in the open image:
1 Click File > Open .
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Browse for the partition or directory in the left pane where you want to create the directory,
then click
Image > Create Directory .
You can also click the New Directory icon.
4
Specify the name of the directory, then click OK .
31.8.3 Creating a New Partition
New partitions cannot be created in an existing base or add-on image that you opened for editing.
You can only create a new partition in a new image file. For more information, see
“Adding
Partitions” on page 467 .
31.8.4 Resizing a Partition
You can resize the partitions in a base image, but not an add-on image. For more information, see
“Changing a Partition’s Size” on page 459 .
31.9 Creating a New Image File
Do the following to create a new image file:
Š
Section 31.9.1, “Creating, Configuring, and Saving the New Image File,” on page 466
Š
Section 31.9.2, “Selecting New Image File Options,” on page 466
31.9.1 Creating, Configuring, and Saving the New Image File
1 Click File > New .
2 Configure the new image file using the instructions in “Selecting New Image File Options” on
page 466 , then return to Step 3 .
3
To save the new image file, click Save As .
4 Specify an image filename, including the
.zmg
filename extension, then click Save .
31.9.2 Selecting New Image File Options
You can do the following in this new image file:
Š “Adding Partitions” on page 467