Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Руководство администратора

Страница: 396 / 674

396 Novell ZENworks 7.2 Linux Management Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
For example, in the
ifcfg-eth-id-00:AA:BB:11:22:33
file, the trailing
identifier,
AA:BB:22:33
, is the MAC address for the device.
2c
Rename the file to
ifcfg-ethX,
where X represents the number of Ethernet devices
on the system. For example, the name for the configuration
eth0
is
ifcfg-eth0
.
3 In
the /etc/sysconfig/network/config
file, change the value of
FORCE_PERSISTENT_NAMES
to
No
.
4 Reboot the device.
Disabling the Persistent Network Device Names for SLES 9 / NLD
You must rename the Ethernet configuration file to initialize the Ethernet devices on boot.
1 Go to
/etc/sysconfig/network
.
2
Find the
ifcfg-eth
file for each Ethernet device. In the filename, the trailing identifier for
an Ethernet device represents the MAC address for the device.
For example,
In the ifcfg-eth-id-00:AA:BB:11:22:33 file, the trailing identifier,
AA:BB:22:33, is the MAC address for the device.
3 Rename the file to
ifcfg-ethX,
where X represents the number of Ethernet devices on the
system. For example, the name for the configuration
eth0
is
ifcfg-eth0
.
Disabling the Persistent Storage Device Names
To disable the persistent storage device names for SLES9/SLES10/SLED9/SLED10:
1 Search for the
/dev/disk/by-*
references in the boot loader configuration file
/boot/
grub/menu.lst
and the file system table
/etc/fstab.
2 Store the mapping of
/dev/disk/by-*
symlinks to their targets in a scratch file:
ls -l /
dev/disk/by-* > /tmp/scratchpad.txt
.
3 Remove storage-specific entries, such as SAN or iSCSI volumes, that are not local to the
system.
4 In
/boot//grub/menu.lst and/etc/fstab
files, replace the
/dev/disk/by-*
entries from the scratch file with the device names the symlinks point to.
5 Reboot the device.