Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Руководство администратора

Страница: 388 / 674

388 Novell ZENworks 7.2 Linux Management Administration Guide
n
ov
do
cx (e
n)
11
Ju
ly 20
08
5 If you configured the AMT device to use DHCP mode for IP addressing, you might need to
boot the device into an operating system to discover a currently valid IP address.
You can use the ZENworks Linux Management imaging CD or DVD for this, if necessary.
Boot from the CD or DVD, select the ZENworks Maintenance Mode, then at the bash prompt
enter
ifconfig eth0
. This provides the currently assigned IP address.
6
Run
/opt/novell/zenworks/zdm/winutils/smb-provisioning.exe
on a
Windows XP workstation running .NET framework to display the following dialog box:
This must be run on a different device than is being provisioned.
7
Fill in the fields:
7a Enter the appropriate administrator account and passwords in their respective fields.
This is the same as you entered in
Step 2 .
7b Enter the currently valid IP address for the device.
7c
Enter an enterprise name.
Intel suggests that the enterprise name be chosen to indicate the device’s general location.
For example, all the devices in the home office may be given an enterprise name of
“Company_HQ,” and all devices in field offices may be given enterprise names reflecting
their geographical locations.
While it is not required, it is assumed that large numbers of devices will have the same
enterprise name. Each AMT device itself may have up to four different enterprise names.
You can use the
View Current Enterprise Names or the Delete Existing Enterprise Names
to manage the names in the Progress list box.
8
Select Add Enterprise Name , then click Exit .