Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008, Руководство администратора

Страница: 163 / 674

Creating Policies 163
n
ov
do
cx (e
n)
11
Ju
ly 20
08
Š
Specify the schedule for this policy
Š
Specify groups for this policy
9
Assign the policy to the devices.
9a Click Add to browse for and select the appropriate Server or Workstation objects.
You can also select Folder or Group objects.
9b Click the down-arrow next to Servers or Workstations to expand the list, then click the
underlined link in the Name column to select the desired objects and display their names
in the Selected list box.
Assigning a policy to a Group object is the preferred method of assigning the policy.
Assigning the policy to a large number of objects (for example, more than 250) might
cause increased server utilization.
9c Click OK .
10 Click Next to display the Policy Schedule page, then select the schedule to apply to the
assignments.
The settings you configure on this page determine when the policy is applied to devices.
See
Section 15.3, “Schedules,” on page 122 for information about the available schedules.
NOTE: If you select Day of the Week Specific as the schedule type and Start Immediately at
Start Time, and then Repeat until End Time Every , and if the Start Time and End Time spans
midnight, the Remote Execute policy is executed only at the Start Time and fails to repeat
execution.
11 Click Next to display the Policy Groups page.