Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Страница: 89 / 374

Satellites 89
n
ov
do
cx (e
n)
16
Ap
ril 20
10
5 To confirm the removal, click OK .
6
As necessary, reconfigure the managed devices that used the Satellite so that they can continue
to receive content and roll up collection information.
For more information, see
Chapter 9, “Closest Server Rules,” on page 99 .
7 (Conditional) The Imaging role is immediately removed from the device. If the role is not
immediately removed, it is removed only during the next device refresh schedule. If you want
to immediately remove the role from the device, manually refresh the device in one of the
following ways:
Š
In the Configuration tab > the Server Hierarchy , select the check box next to the devices
you want to refresh, then click Action > Refresh Device .
Š
On the Windows managed device, right-click the icon, then click Refresh .
Š On the Linux unmanaged device, open a terminal, change your current working directory
to
/opt/novell/zenworks/bin/
, and execute
./zac ref
.
7.5 Specifying Content to Be Hosted
Because Content role devices retrieve their content from their parent Primary Servers, any content
that you want hosted on a Satellite must also be hosted on its parent Primary Server.
You can specify the content that is included or excluded on specific Primary Servers or Satellites
performing the Content role.
When you create relationships between content and content servers (ZENworks Primary Servers and
Satellites) by using the Select Content to Update Wizard, these relationships override any existing
relationships. For example, assume that you want Bundle A and Policy B to be hosted on Server 1
but not on Server 2. Currently, the content is hosted on both servers. You select Bundle A and Policy
B, then use the Select Content to Update Wizard to include the content on Server 1 and exclude it
from Server 2. During the next scheduled replication, Bundle A and Policy B are removed from
Server 2.
To specify the content to be hosted:
1
In ZENworks Control Center, click the Configuration tab. In the Server Hierarchy section,
select the check boxes next to the Satellites with the Content role that you want to designate as
the hosts for one or more pieces of content.
2
Click Action > Specify Content to launch the Select Content to Update Wizard.