manualshive.com logo in svg

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE, Руководство системного администратора

Novell ZENworks 10 Configuration Management SP3 - Network Discovery Database Structure - это системное руководство для администраторов системы, которое поможет в настройке и управлении сетевыми ресурсами. Скачайте бесплатное руководство по системному администрированию с нашего сайта manualshive.com.

Поделиться
Скачать
background image

Content Repository

28

237

n

ov

do

cx (e

n)

  16
 Ap
ril 20

10

28

Content Repository

Each ZENworks

®

 Server contains a content repository. The content repository stores all bundle and 

policy content that has been replicated to the server and any images that have been captured and 
stored to the server.

ZENworks 10 Configuration Management supports any filesystem to host the content repository, 
although each filesystem has advantages and limitations. For example, the XFS filesystem handles 
very large files, which can be an advantage, depending on the nature of the content in the repository.

A single content repository cannot be shared by multiple Primary Servers. Each server must use its 
own content repository.

The content repository is self-maintaining. Whenever you add a bundle or policy, the bundle or 
policy content is added to the appropriate content repositories based upon the replication settings. 
Whenever you remove a bundle or policy or change which servers host its content, the bundle or 
policy content is also removed from the appropriate servers.

If necessary, you can move the content repository to a different location. The following sections 
provide instructions:

Š

Section 28.1, “Changing the Location of the Content Repository on a Windows Server,” on 
page 237

Š

Section 28.2, “Changing the Location of the Content Repository on a Linux Server,” on 
page 239

Š

Section 28.3, “Mounting the Content Repository on a Linux Server to an NSS Volume,” on 
page 240

28.1  Changing the Location of the Content 

Repository on a Windows Server

The content repository is found in the following location on a Windows server:

installation_path

\zenworks\work\content-repo

You can specify a different disk drive to be your content repository. In Windows, this is done by 
“mounting” the drive. Mounting is simply pointing an existing path to a hard drive partition without 
the use of mapped drive letters.

In the following steps, you mount the default content repository location to a disk drive partition, 
which becomes the new content repository:

1

Make sure that the disk drive you want to use is attached to the server and is properly formatted 
as NTFS.
This disk drive can be an existing or new one for the machine. The hardware must be 
recognized by the server. However, do not specify a drive letter if you are adding a new disk 
drive to the machine. Windows does not allow mounting to a drive letter.

Содержание ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE

Panasonic WJ-ND300 Administrator Console Operating Instructions Manual preview
WJ-ND300 Administrator Console
Бренд: Panasonic Страницы: 27
Waves Software Audio Processor DLA User Manual preview
Software Audio Processor DLA
Бренд: Waves Страницы: 6
Garmin Pilot User's Android User Manual preview
Pilot User's Android
Бренд: Garmin Страницы: 150
Tascam GigaStudio 3.04 Supplement Sheet preview
GigaStudio 3.04
Бренд: Tascam Страницы: 2
TANDBERG MPS API Interface D13639 User Manual preview
MPS API Interface D13639
Бренд: TANDBERG Страницы: 84
MACROMEDIA BREEZE 5 Integration Manual preview
BREEZE 5
Бренд: MACROMEDIA Страницы: 232
Acroprint ATR 20/20 Quick Start Manual preview
ATR 20/20
Бренд: Acroprint Страницы: 1
ACRONIS TRUE IMAGE CORPORATE WORKSTATION 8.0 User Manual preview
TRUE IMAGE CORPORATE WORKSTATION 8.0
Бренд: ACRONIS Страницы: 79
ACRONIS TRUEIMAGE DELUXE User Manual preview
TRUEIMAGE DELUXE
Бренд: ACRONIS Страницы: 90
ACRONIS TRUE IMAGE 8.0 User Manual preview
TRUE IMAGE 8.0
Бренд: ACRONIS Страницы: 97
Vonamic 703100 Configuration Manual preview
703100
Бренд: Vonamic Страницы: 31
Sonifex D:Scribe User Handbook Manual preview
D:Scribe
Бренд: Sonifex Страницы: 68
MINOLTA-QMS PageScope Software Manual preview
PageScope
Бренд: MINOLTA-QMS Страницы: 60
MACROMEDIA BREEZE 5-MANAGER Manual preview
BREEZE 5-MANAGER
Бренд: MACROMEDIA Страницы: 306
MACROMEDIA FLASHLITE2 ACTIONSCRIPT-LANGUAGE Reference preview
FLASHLITE2 ACTIONSCRIPT-LANGUAGE
Бренд: MACROMEDIA Страницы: 780
McAfee VIRUSSCAN 5.1 User Manual preview
VIRUSSCAN 5.1
Бренд: McAfee Страницы: 315
Native Instruments Skanner User Manual preview
Skanner
Бренд: Native Instruments Страницы: 55
LXE 1280 Reference Manual preview
1280
Бренд: LXE Страницы: 260

Бренды по названию

Популярные бренды

Загрузить еще бренды